| NO. |
Title |
DateTime |
View |
| 1 |
Speed Sensor Signal Isolation Transmitter |
2012-3-12 14:54:00 |
 Download |
| Explain |
¡ñ¡¡speed sensor signal input directly, square wave output
¡ñ¡¡sine wave, saw tooth wave signal input, square wave signal output
¡ñ¡¡the amplification and reforming of 200mV peak weak signal
¡ñ¡¡no need to change the wave frequency with high response speed
¡ñ¡¡power supply, signal input/output£º 3000VDC tri-isolation
¡ñ¡¡auxiliary power supply£º5V¡¢12V¡¢15V or 24V single power supply DC
¡ñ¡¡low cost, small size, DIN 1x1, DIN 2x2, high reliability
|
| 2 |
ISO Series Frequency Signal Isolation & Conversion IC |
2012-3-12 14:53:32 |
Download |
| Explain |
¡ñ¡¡precision level£º0.1¡¡0.2¡¡0.5
¡ñ¡¡very high linearity value£¨nonlinearity < 0.1%£©
¡ñ APS/signal input/ signal output£º 3OOOVDC tri-isolation
¡ñ¡¡APS£º5VDC£¬12VDC£¬24VDC single power supply
¡ñ¡¡0-1KHz/0-5KHz/0-10KHz frequency signal isolation converting to standard 0-75mV/0-2.5V/0-5V/0-10V voltage signal or 0-10mA/0-20mA/4-20mA current signal
¡ñ¡¡provide input isolation power£º5VDC/10mA
|
| 3 |
Large Current output type-Din rail |
2012-3-12 14:53:00 |
Download |
| Explain |
¡ñ¡¡Accuracy linearity error level£º 0.1¡¢0.2¡¢0.5 level
¡ñ¡¡4-20mA/0-5V/0-10V standard signal input
¡ñ¡¡0~100mA/0~500mA/0~1A current signal output
¡ñ¡¡0~1V(max 1A)/0~5V(max 500mA) voltage signal output
¡ñ¡¡Signal input/output 3000VDC isolation
¡ñ¡¡Auxiliary power supply£º12V¡¢15V or 24V single power supply DC
|
| 4 |
4-20mA Current Loop Isolation Interface IC |
2011-12-28 16:55:00 |
Download |
| Explain |
Signal input/Output, 3000VAC isolated voltage; 4-20mA high accuracy of current input/output. |
| 5 |
4-20mA-F Signal Dual Loop Isolation Distributor IC |
2011-12-28 15:17:29 |
Download |
| Explain |
¡¤Supply power for sensor:24VDC
¡¤4-20mA Signal loop input
¡¤High linearity (Nonlinearity<0.5%)
¡¤Low cost, small size, standard SIP12 package
¡¤4-20mA signal input/Output, 3000VDC isolated voltage
¡¤Industrial temperature (-45¡ª+85¡æ)
¡¤Panel or DIN Rail mounted |
| 6 |
DIN 1X1 V/F Transmitter |
2011-12-13 14:56:54 |
Download |
| Explain |
Change the input signal into unit impulse signal
Efficiency grade:0.1,0.2,0.5
International standard signal input: 0-5V/0-10V/1-5V, 0-10mA/0-20mA/4-20mA
Standard signal output: 0-5KHz/0-10KHz/1-5KHz and so on
Extremely high linearity in whole process(Nonlinearity <2%)
Signal input/output/ Accessorial power supply |
| 7 |
DIN Rail-mounted Thermal Resistance Isolation Transmitter |
2008-10-16 13:02:30 |
Download |
| Explain |
>> Three-wire,four-wire or two-wire PT100 thermal resistance signal input
>> Accuracy, Linearization error grade:0.2
>> Linearization disposal and long line compensate circuit
>> Isolation Voltage: 3000VDC input/power/output
>> Power£º5V/12V/15V/24VDC or 110VAC/220VAC
|
| 8 |
High Current Output Signal Isolated Amplifier |
2008-10-14 9:34:35 |
Download |
| Explain |
SUNYUAN This product contains a group of high accuracy isolated amplifier circuit and a power amplifier circuit.It is widely used in current signal or voltage signal drive capability high need situation. Standard DIN rail-mounted,easy to use. |
HOME